|
|
|
Click
on 'View Details' for detailed
specs and ordering information |
|
|
|
|
|
|
 |
Delivers
undistorted midrange and bass by absorbing
the speakers back-wave! Minimize sound
transmitted to adjacent rooms! |
|
Loudspeaker
design, basic rule:
In-wall speaker cavities must be able
to absorb the speakers back-wave. Otherwise,
sound will reflect back towards the speaker
cone, causing it to become distorted, blurred
and bass shy. In addition, by absorbing sound
in the walls, less noise is transmitted to
adjacent rooms! |
|
The
Sound Chamber solution…
Sound Chamber is a custom formulated acoustical
foam designed and shaped for all 5", 6" and
8" in-wall or ceiling speakers. Its "open
cell" design provides maximum absorbency.
The "V" shaped grooves (patent pending) allow
low frequencies (below 100Hz) to escape, utilizing
the entire wall for producing deep bass. The
"V" grooves and sidewalls are thick enough
that they will support the Sound Chamber in
place (2x4 studwalls) with no additional hardware.
Each Sound Chamber is divided into four modules,
so it will fit through the speaker cutout.
In addition, Sound Chamber is fire resistant
and an excellent insulator. |
|
Sound
Chamber Dimensions: 7.25" x 12"
x 4" x four per speaker, eight per pair |
|
Sound
Absorption Values:
| Frequency
(Hz) |
125 |
250 |
500 |
1000 |
2000 |
4000 |
NRC/AVG |
| 1" thick |
.13 |
.37 |
.96 |
1.08 |
1.07 |
1.07 |
.85 |
|
|
Fire
Safety: Cal 117 |
|
Suggested
Retail: $69.95 pair |
|
| |
|
|
|
|
|
Dare
to Compare!
The sound quality difference is astonishing when comparing (in-wall/ceiling)
speakers with and without Sound Chambers. |
|
How
they work...
Sound Chambers are designed from advanced open-cell foam that absorbs sound waves emitted from the rear of your speakers. Without them, sound will reflect back at the speaker cone(s), causing extreme distortion. An additional benefit of the SC-2 is rear sound waves are minimized from traveling to adjacent rooms. Further benefits include the addition of insulation between the speaker and exterior elements. |
|
How
they install…
Sound Chambers are designed for placement (pressure fit) behind your in-wall speakers or (lay) above your in-ceiling speakers. Please note the ends of Sound Chambers are intentionally open, so extreme low frequencies are not blocked from exiting the SC-2. |
|
Sound
Chamber Dimensions: 7.25" x
12" x 4" x four per speaker,
eight per pair15” H x 14.5”W
x 4”D per piece, each carton contains
(one pair) two |
|
Sound
Absorption Values: 1.85 NRC/AVG |
|
Fire
Safety: Meets or exceeds Cal 117 |
|
"R"
Value: Minimum 13 Rating |
|
| |
| |
|
| |
|
|
|
|
